01928 739191 firstname.lastname@example.org
USING SMART KNIVES FOR THE FIRST TIME
SMART KNIVES ARE INCREDIBLY EASY TO USE
But people who neglect to read instructions can make mistakes.
Remove the coloured nose cap.
It is not a protective end cap, it is a critical component.
Attempt to adjust the blade protrusion.
Doing so will cause the unit to malfunction.
Blade protrusion is factory pre-set.
More blade does NOT = MORE PRESSURE
Attempt to remove or change the blade.
When blunt return the complete unit to us for exchange.
Dismantle the unit.
Doing so will cause it to malfunction.
READ THE LABEL
Ensure that cutter offset is set correctly.
AND PLEASE REMEMBER
A sharp new blade or Smart Knife will cut with less force than the one it replaces.
Start with a low force - do a test cut.
This information is for your benefit - not ours
If you are careless we get more of your money!
Just one example
of many types we manufacture
for all modern drag knife plotters
to cut all common media types
And many unusual and difficult types
HOW THEY WORK
We preset the blade protrusion to expose a few microns more than the thickness of the range of materials the unit is designed to cut.
When your plotter is cutting correctly the coloured nose cap will run very close to the media but will not normally touch it.
If the knife force/pressure is accidentally set too high or if the media lifts because it is uneven or obstructed the nose cap will contact with the media and prevent excessive blade penetration.
Excessive blade penetration can jam media by pinning it to the cutting platen.
This is a major cause of damage to blades and cutting platens that can also cause expensive damage to plotters by straining cutting heads and other fragile mechanisms.
WHEN ACCIDENTS OCCUR SMART KNIVES CAN ELIMINATE OR SUBSTANTIALLY REDUCE THE RISK OF DAMAGE
Smart Knives are accurate, cost effective and incredibly easy to use.
If you don’t already use them you really should try them.
We are happy to supply them to try on a “sale or return” basis.
We never get them back!
WHY USE THEM?
No need to take blade holders apart or fiddle with springs.
Every blade is already fitted in its own blade holder.
Every unit is factory pre-set to eliminate setting errors.
Every unit is ready to use straight from the packet.
No need to remember what type of blade is in your plotter.
Noses are colour coded to indicate type in use.
No need to make fiddly adjustments.
Blade protrusion is factory pre-set.
ARE THEY DISPOSABLE?
NO. When they eventually blunt you return them to us for exchange.
We swap them for units with NEW blades already fitted and pre-set.
We also send you an addressed jiffy bag ready for your next order.
WHAT DO THEY COST?
NEW Units ...............…..…...£22.00 + vat
EXCHANGE Units .…..........£11.00 + vat
WILL THEY FIT YOUR PLOTTER?
We manufacture types to fit almost all known plotters.
WHAT IF YOU DON’T LIKE THEM?
Return them to us within fourteen days for a full and immediate refund.
Nobody who has tried them has ever returned them!!!
MADE IN UK
indicates blade type
tungsten carbide blades.
Types to fit all
So easy to use they are
often described as
“plug and play” knives.
Types to cut all common materials
A SMART KNIFE IS NOT
JUST ANOTHER BLADE.
Smart Knives are combined blade and holder units in which the blades are already fitted and accurately pre-set .
You don’t need to make fiddly adjustments. Smart Knives arrive pre-set ready for use.
They replace your blade
and your blade holder
in three simple steps.
Remove your blade holder and blade
Insert a Smart Knife.
Could anything be easier?
When you insert a new blade or Smart Knife
you should always check your machine settings
and do a test cut.