Blades for Gerber GS15 Plotters - Edward Mathias & Co

EM Logo
01928 739799
info@edwardmathias.com
Title
Go to content

Blades for Gerber GS15 Plotters

Blades
Images shown are for identification only - they are not to scale.
IMPORTANT - PLEASE READ
These are the types most commonly used in most (but not all) Gerber sprocketed machines.
They can be used in GS15+ and HS15+ models when used in tangential mode which is the most accurate mode.
They should NOT be used in GS15+ or HS16+ models when used in drag cutting mode.
They should NOT be used in GSX models which are drag knife cutters.
Choosing the correct blade type for these machines can be confusing.
If you are unsure about which type/s you need you are welcome to call us on 01928 739799 or email: info@edwardmathias.com
E30
Tangential Blade



£14.00
+ delivery & VAT

This is the type most commonly used as a general purpose blade in most Gerber sprocketed machines.

Please read the information at the top of this page.

Space reserved for future use
E45
Tangential Blade



£15.00
+ delivery & VAT

Similar to E30 but for thicker materials.
Useful for cutting card, flock, some reflectives, some thick laminated materials and some sandblast mask.

Please read the information at the top of this page.

Space reserved for future use
E60
Tangential Blade



£16.00
+ delivery & VAT

Similar to E45 but finer and more fragile.
Mainly used by Stonemasons for cutting thick (but not tough) Sandblast mask.

Please read the information at the top of this page.

Space reserved for future use
We advise you also read:   

We also make "specials" for cutting unusual materials.
To show them here is more likely to be confusing than constructive.
If you need to solve a cutting problem you are welcome to call us.
We can usually help.

Back to content